# Makefile.in generated by automake 1.8.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/include/rules.mk TODO subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive am__installdirs = "$(DESTDIR)$(docdir)" docDATA_INSTALL = $(INSTALL_DATA) DATA = $(doc_DATA) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CYGPATH_W = @CYGPATH_W@ DBKDSSSLPRINT = @DBKDSSSLPRINT@ DBKXSLHTML = @DBKXSLHTML@ DBKXSLHTMLNOCHUNK = @DBKXSLHTMLNOCHUNK@ DBK_XML_DTD = @DBK_XML_DTD@ DEFS = @DEFS@ DIA = @DIA@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ GHOSTSCRIPT = @GHOSTSCRIPT@ GZIP = @GZIP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTALL_TIMEZONE_FALSE = @INSTALL_TIMEZONE_FALSE@ INSTALL_TIMEZONE_TRUE = @INSTALL_TIMEZONE_TRUE@ JADE = @JADE@ LAMBDA = @LAMBDA@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LN_S = @LN_S@ LOGGER = @LOGGER@ LR_ARCHIVEDIR = @LR_ARCHIVEDIR@ LR_PERL5LIBDIR = @LR_PERL5LIBDIR@ LR_SPOOLDIR = @LR_SPOOLDIR@ LTLIBOBJS = @LTLIBOBJS@ LYNX = @LYNX@ MAKEINFO = @MAKEINFO@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ ODVIPS = @ODVIPS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PDFJADETEX = @PDFJADETEX@ PERL = @PERL@ PLOTICUS = @PLOTICUS@ POD2MAN = @POD2MAN@ PS2PDF = @PS2PDF@ SENDMAIL = @SENDMAIL@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TAI64NLOCAL = @TAI64NLOCAL@ TAR = @TAR@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XMLCATALOG = @XMLCATALOG@ XMLLINT = @XMLLINT@ XSLTPROC = @XSLTPROC@ am__leading_dot = @am__leading_dot@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = $(datadir)/doc/$(PACKAGE) dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ MAX_JADE_ERRORS = 10 convertorsdir = $(libexecdir)/$(PACKAGE)/convertors pluginsdir = $(sysconfdir)/$(PACKAGE)/plugins schemadir = $(datadir)/$(PACKAGE)/schemas templatesdir = $(datadir)/$(PACKAGE)/templates XML_DCL = $(top_srcdir)/all/lib/xml/xml.dcl SUFFIXES = .pod .1 .7 .pm .3pm .dbx .xml .dia .eps .in PERL2MAN1_RULE = \ $(POD2MAN) --section=1 --center="LogReport's Lire Documentation" --release='Lire $(VERSION)' $? $@ PERL2MAN3PM_RULE = \ $(POD2MAN) --section=3pm --center="LogReport's Lire Documentation" --release='Lire $(VERSION)' $? $@ PERL2MAN7_RULE = \ $(POD2MAN) --section=7 --center="LogReport's Lire Documentation" --release='Lire $(VERSION)' $? $@ XML2HTML_RULE = \ mysrc=`cd $(srcdir) && pwd`; \ mytop=`cd $(top_srcdir) && pwd`; \ outdir=`dirname $@`; \ src=$$mysrc/`basename $<`; \ $(mkinstalldirs) $$outdir && \ cd $$outdir && \ rm -f *.htm* && \ epss=`for i in $^; do echo $$i; done | grep '\.eps$$'`; \ for i in $$epss; do \ png=`basename $$i .eps`.png; \ $(PERL) $(top_builddir)/all/script/lr_gsconvert --resize=576,576 pngalpha $$i $$png; \ done; \ XML_CATALOG_FILES=$$mytop/catalog.xml $(XSLTPROC) --nonet --param 'graphic.default.extension' '"png"' $(DBKXSLHTML) $$src HTML2TXT_RULE = \ XML_CATALOG_FILES=$(top_srcdir)/catalog.xml $(XSLTPROC) --nonet $(DBKXSLHTMLNOCHUNK) $< > tmp.html && \ $(LYNX) -nolist -dump tmp.html > $@ && \ rm tmp.html XML2PDF_RULE = \ base=`basename $@ .pdf`; \ epss=`for i in $^; do echo $$i; done | grep '\.eps$$'`; \ pdfs=""; \ for i in $$epss; do \ pdf=`basename $$i .eps`.pdf; \ $(PERL) $(top_builddir)/all/script/lr_gsconvert --resize=396,396 pdfwrite $$i $$pdf; \ pdfs="$$pdfs $$pdf"; \ done; \ $(JADE) -E$(MAX_JADE_ERRORS) -t tex -d $(DBKDSSSLPRINT) $(XML_DCL) $< && \ i=0; \ while test $$i -lt 3; do \ if $(PDFJADETEX) -interaction=batchmode $$base.tex > /dev/null; \ then \ if grep 'undefined references\| [Rr]erun' $$base.log > /dev/null; \ then :; else break; fi; \ else \ grep '^! ' $$base.log; \ exit 1; \ fi; \ i=`expr $$i + 1`; \ done; \ rm -f $$base.log $$base.out $$base.aux $$base.tex $$pdfs DIA2EPS_RULE = \ $(DIA) --nosplash -e $@ $< DIA2PNG_RULE = \ $(DIA) --nosplash -e $@ $< PERLMODULES_INSTALL_RULE = \ @for p in $(perlmodules) ; do \ f="`echo $$p | sed -e 's|^.*/lib/||'`" ; \ d="`echo $$f | sed -e 's|\(^.*\)/.*|\1|'`" ; \ if test ! -d $(DESTDIR)$(LR_PERL5LIBDIR)/$$d; then \ $(mkinstalldirs) $(DESTDIR)$(LR_PERL5LIBDIR)/$$d ; \ fi ; \ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(LR_PERL5LIBDIR)/$$f"; \ $(INSTALL_DATA) $$p $(DESTDIR)$(LR_PERL5LIBDIR)/$$f ; \ done PERLMODULES_UNINSTALL_RULE = \ @for p in $(perlmodules); do \ f="`echo $$p | sed -e 's|^.*/lib/||'`"; \ echo " rm -f $(DESTDIR)$(LR_PERL5LIBDIR)/$$f"; \ rm -f $(DESTDIR)$(DESTDIR)$(LR_PERL5LIBDIR)/$$f; \ done # html subdirs are handled in this Makefile, examples/ has its own Makefile.am SUBDIRS = examples # HTML documentation uses *-local hooks # target goes into all-local # install goes into install-data-local # uninstall goes into uninstinstal-local # maintainer-clean-local must erase the HTML directories # dist-hook must copy the documentation to the source tree html_doc = user-manual/index.html \ dev-manual/index.html html_doc_dirs = user-manual dev-manual manuals = user-manual.pdf user-manual.txt \ dev-manual.pdf dev-manual.txt changelogs = ChangeLog.2000.gz ChangeLog.2001.gz ChangeLog.2002.gz \ ChangeLog.2003.gz ChangeLog.2004.gz ChangeLog.2005.gz doc_DATA = $(manuals) $(changelogs) BUGS xml_source = user-manual.dbx dev-manual.dbx XML_FILES = $(xml_source) image_source = flow-analysis.dia \ flow-generation.dia \ flow-normalisation.dia \ flow-overview.dia \ flow-report.dia \ flow-xslt.dia \ lire-dlf-converters.dia dev_manual_eps_imgs = \ flow-analysis.eps \ flow-generation.eps \ flow-normalisation.eps \ flow-overview.eps \ flow-report.eps \ flow-xslt.eps \ lire-dlf-converters.eps dev_manual_png_imgs = \ dev-manual/flow-analysis.png \ dev-manual/flow-generation.png \ dev-manual/flow-normalisation.png \ dev-manual/flow-overview.png \ dev-manual/flow-report.png \ dev-manual/flow-xslt.png \ dev-manual/lire-dlf-converters.png dtd_infos = \ $(top_srcdir)/all/lib/xml/dtd/ldsml.dbx \ $(top_srcdir)/all/lib/xml/dtd/lire-desc.dbx \ $(top_srcdir)/all/lib/xml/dtd/lire-types.dbx \ $(top_srcdir)/all/lib/xml/dtd/lrcml.dbx \ $(top_srcdir)/all/lib/xml/dtd/lrcsml.dbx \ $(top_srcdir)/all/lib/xml/dtd/lrml.dbx \ $(top_srcdir)/all/lib/xml/dtd/lrsml.dbx EXTRA_DIST = \ TODO \ refactoring.txt \ $(doc_DATA) \ $(xml_source) $(image_source) $(dev_manual_png_imgs) \ $(dev_manual_eps_imgs) catalog lire.ent MAINTAINERCLEANFILES = $(manuals) all: all-recursive .SUFFIXES: .SUFFIXES: .pod .1 .7 .pm .3pm .dbx .xml .dia .eps .in .png $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/include/rules.mk $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh uninstall-info-am: install-docDATA: $(doc_DATA) @$(NORMAL_INSTALL) test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)" @list='$(doc_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ done uninstall-docDATA: @$(NORMAL_UNINSTALL) @list='$(doc_DATA)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ rm -f "$(DESTDIR)$(docdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/../include $(distdir)/dev-manual @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || mkdir "$(distdir)/$$subdir" \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="../$(top_distdir)" \ distdir="../$(distdir)/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-recursive all-am: Makefile $(DATA) all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(docdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-data-local install-docDATA install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-docDATA uninstall-info-am uninstall-local uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \ check-am check-local clean clean-generic clean-recursive ctags \ ctags-recursive distclean distclean-generic \ distclean-recursive distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-data-local install-docDATA \ install-exec install-exec-am install-info install-info-am \ install-man install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-local \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-docDATA uninstall-info-am \ uninstall-local .pm.3pm: $(PERL2MAN3PM_RULE) .pod.1: $(PERL2MAN1_RULE) .pod.7: $(PERL2MAN7_RULE) .in.1: $(PERL2MAN1_RULE) .dia.eps: $(DIA2EPS_RULE) .dia.png: $(DIA2PNG_RULE) check-local: check-xml # We have to work with the fact that xmllint doesn't # give an error when validation fails. It exits with # non-zero status only when the file isn't well-formed # We have to test for either srcdir/$f or $f : lire.xml # exists in . only. # check-xml: $(XML_FILES) @if test -z "$(XML_FILES)"; \ then \ echo No XML files to validate; \ else \ for f in $(XML_FILES); \ do \ echo -n Checking $$f...; \ test -f $(srcdir)/$$f && file=$(srcdir)/$$f || file=$$f; \ SGML_CATALOG_FILES="$(top_builddir)/catalog:$(top_srcdir)/all/lib/xml/dtd/catalog" $(XMLLINT) --catalogs --noout --valid $$file 2> xmllint.error; \ if test -s xmllint.error; \ then \ echo failed; \ cat xmllint.error; \ rm -f xmllint.error; \ exit 1; \ else \ echo ok; \ rm -f xmllint.error; \ fi; \ done; \ fi $(dtd_infos)/%: cd doc && $(MAKE) $* $(html_doc_dirs): mkdir -p $@ dev-manual/index.html: dev-manual.dbx $(dtd_infos) $(dev_manual_png_imgs) $(XML2HTML_RULE) dev-manual.pdf: dev-manual.dbx $(dtd_infos) $(dev_manual_eps_imgs) $(XML2PDF_RULE) dev-manual.txt: dev-manual.dbx $(dtd_infos) $(HTML2TXT_RULE) dev-manual/flow-analysis.png: flow-analysis.dia $(DIA2PNG_RULE) dev-manual/flow-generation.png: flow-generation.dia $(DIA2PNG_RULE) dev-manual/flow-normalisation.png: flow-normalisation.dia $(DIA2PNG_RULE) dev-manual/flow-overview.png: flow-overview.dia $(DIA2PNG_RULE) dev-manual/flow-report.png: flow-report.dia $(DIA2PNG_RULE) dev-manual/flow-xslt.png: flow-xslt.dia $(DIA2PNG_RULE) dev-manual/lire-dlf-converters.png: lire-dlf-converters.dia $(DIA2PNG_RULE) user-manual/index.html: user-manual.dbx $(XML2HTML_RULE) user-manual.pdf: user-manual.dbx $(XML2PDF_RULE) user-manual.txt: user-manual.dbx $(HTML2TXT_RULE) # AutoMake extensions do handle HTML documentation in chunks all-local: $(html_doc_dirs) $(html_doc) install-data-local : $(html_doc) for i in $(html_doc); do \ dir=`dirname $$i`; \ $(mkinstalldirs) $(DESTDIR)$(docdir)/$$dir; \ cp $(srcdir)/$$dir/* $(DESTDIR)$(docdir)/$$dir; \ done uninstall-local: -for i in $(html_doc); do \ dir=`dirname $$i`; \ for f in $(srcdir)/$$dir/*; do \ file=`basename $$f`; \ rm -f $(DESTDIR)$(docdir)/$$dir/$$file; \ done; \ rmdir $(DESTDIR)$(docdir)/$$dir; \ done maintainer-clean-local : -for i in $(html_doc); do \ dir=`dirname $$i`; \ rm -f $(srcdir)/$$dir/*; \ rmdir $(srcdir)/$$dir; \ done dist-hook : $(html_doc) for i in $(html_doc); do \ dir=`dirname $$i`; \ $(mkinstalldirs) $(distdir)/$$dir; \ cp $(srcdir)/$$dir/*.html $(distdir)/$$dir; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: